Lutz, FL

Replaced angle stop for toilet

Install 3 toilets

Gave estimate

provided estimate

Clear shower head

Estimate

Replaced washer valves

Leak detection

Gave option for toilet pull and reset with new wax ring, new bolts, flange inspection and resealing toilet. Also gave option for new shower pan and enclosure fiber glass. Customer said they will call us in the morning to do the work.

Estimate submitted.

Toilets are all very old and have a weak flush. Customer is going to have us replace all three toilets.

Cleared a blockage in the main sewer line through the cleanout access. Used a heavy-duty drain auger to break up and remove the obstruction, restoring proper flow. Verified the clearing by running water from multiple fixtures and checking for smooth drainage. Ensured the main line is free of debris and buildup, preventing future backups. The cleanout access allows for efficient maintenance and quick resolution of clogs. This process ensures the main sewer line operates effectively.

Inspected and quoted customer to replace (4) 8 inch center set faucets, and (1) chrome shower wand. These options will alleviate low pressure issues, leaks, and loose fixtures customer was concerned about.

Customer has supplied utility sink to be installed in upstairs laundry room. We will need to supply tubular for the drain and 2 emergency shut off valves for water supply. Water supply piping is pex b.

Found the moen automatic valve is off I open back up and have pressure back on

Made access to pinhole leak through slab repaired pipe patch hoeMade access to pinhole leak through slab repaired pipe patches in concrete.

Sold slab leak copper need to cheap out concrete and recement no warranty customer sold the house

Replaced ice maker valve and omen cartridge and handle

Will cut out section of 3/4 PVC and swing joint a new 1/4 Turn Brass IPS ball valve as an inline replacement emergency shut off valve. Will replace broken isolation valve copper 1/2 inch sweat on gate valve for guest bathroom shower. Will provide and install new IPS brass ball valve, solder on adapter and transition repair joint into CPVC. This is for hot side only. Upon arrival inspected and found customer had attempted rebuilding gate valve, has new handle and stem. When turned handle entire stem fell out of valve. Valve threads are stripped and beyond repair.

Cut wall open where customer said leak should be but no visible leak. Turned water on and water rised from the floor. Gave pricing on slab leak by jack hammering concrete, repairing pipe and putting new concrete down.

Free estimate Leak detection needs to be set up for Monday. Customer will be home all day.

Estimate to repair copper pipe outside underneath the well bladder tank As long as the copper pipe is in good condition and we don’t have to chase it back and the repair isn’t as difficult as we anticipated, then we will charge $1551.00 If the repair however is more difficult than initially anticipated after digging that section out, then we will charge accordingly.

Free estimate

Leak detection, leak is in laundry room area can not pin point exact location. Called united restoration for customer to come out and work on getting leak pin pointed. Gave option for repipe. You can hear the leak by the water heater and in the laundry room but no sign of visible damage.

This morning in Lutz, FL, I addressed a leaking issue where a hose was spraying water against the wall from the water heater. I replaced both the cold and hot water supply hoses with corrosion-resistant, braided stainless steel lines. After installation, I conducted a pressure test to confirm the integrity of the new hoses, ensuring no leaks and proper functionality.